CAN USB interface, single channel, high-speed
Low-cost CAN USB interface for connecting a computer to a CAN bus network. USB and 9-pin D-SUB connector. Galvanic isolation as standard.
Cost-effective two channel CAN interface
The Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective interface for connecting two high speed CAN busses to a PC or mobile computer. USB connector at one end and two 9-pin D-SUB connectors at the other. Comes with galvanic isolation as standard.
4 channel CAN highspeed interface
This USB to quad channel CAN interface has a standard USB connector at one end and four high speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9pin DSUB connectors. Galvanic isolation as standard.
USB to dual channel CAN or CAN FD interface with scripting capability
USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors. Dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more.
Five channel, high performance, CAN bus interface and standalone datalogger
It allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB. Configurable using Kvaser’s Memorator Config Tool, Memorator Professional 5xHS is also capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is supplied.
Dual channel CAN bus interface and standalone data logger offering advanced features
Message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Device is capable of running user-developed scripts. FD compliant.
Easy-to-use tool for logging CAN-bus serial data, with no preconfiguration or software setup required
With an autobaud function that determines CAN bus bit rate, the Kvaser Memorator Light HS v2 can be attached to any high-speed CAN bus without configuration. All CAN bus traffic is logged in a circular buffer, overwriting the oldest data when the buffer becomes full. A separate circular buffer keeps track of error frame conditions and the message traffic that occurs near the conditions.
Wireless single channel interface, high speed
Kvaser BlackBird v2 is a high performance wireless (WLAN) communication link for the High Speed CAN bus. ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion.
CAN to Ethernet interface CAN to Ethernet interface facilitates the adoption of the Internet of Things (IoT) concept within modern manufacturing environments by enabling data from any CAN product or system to be accessed over the Internet, via an Ethernet equipped PC.
CAN/LIN Hybrid USB interface, dual channel
Kvaser Hybrid 2xCAN/LIN is a flexible, dual channel interface that allows each channel to be assigned independently as CAN or LIN. This makes the Kvaser Hybrid 2xCAN/LIN a must-have ’universal interface’ for every engineer involved in automotive communications!
Wireless CAN bridge
Kvaser Air Bridge Light HS is a configuration-free wireless CAN bridge that achieves predictable latency, without sacrificing stability or range.
CAN bus hub with three female and one male D-SUB9 connectors.
Offering an adjustable CAN termination resistor (120/60/0 Ohm) it provides an affordable and safe way of terminating the CAN circuit when using Kvaser interfaces on a development board, as well as powering interface devices without internal power, such as Kvaser’s Blackbird and Memorator series.
Adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards
The Q-Cable is a 0.3m (approx. 0.98 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. A DSUB male connector connects to the PCIcan board, whilst four DSUB male connectors connect to the CANbus.
D-sub 9 pin, 120 ohm resistor for terminating the CAN bus
Kvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120 Ohm CAN terminating resistor.
One channel CAN interface
CAN add-on board that lets embedded system developers add CAN functionality to any standard computer board with mini PCI Express capability.
Two channel CAN interface
Kvaser Mini PCI Express 2xHS is a highly integrated CAN add-on board that adds two high speed CAN channels to any standard computer board with mini PCI Express capability.
Single channel, high speed CAN interface board for the PCI and PCI-X bus
Features an on-board microcontroller for offloading your main CPU and galvanic isolation for protection against voltage spikes.
Dual channel, high speed CAN interface board for the PCI and PCI-X bus
